The Timeless Look of Timber.Engineered to Endure.
Next-generation Wood Plastic Composite (WPC), Exterior PVC, and High-Density PS Mouldings for luxury residential and commercial feature walls and ceilings.
NORWOOD™ at a Glance
NORWOOD™ is a line of wall and ceiling panels made from WPC, PVC, and PS. Each panel gives you the warmth of a timber finish without the termite damage, swelling, or rot that natural wood runs into in the Philippines. The range covers indoor and outdoor use, so the same look can carry from a living room feature wall to a ceiling to an exterior cladding.
Formulated with high-impact, rigid poly-compounds with built-in UV stabilizers. Engineered for tropical rainfall, high saline coastal air, and eaves exposure where zero moisture absorption is mandatory.
Combines refined hardwood fiber particles with high-density polymer matrices. Delivers the authentic density, tactile grain, and acoustic richness of real timber while permanently eliminating termite vulnerability and moisture decay.
Precision-moulded polystyrene delivers laser-sharp corners, geometric relief, and lightweight rigidity. Perfect for classical box mouldings, modern geometric wall accents, and custom-painted architectural trims.
Formulated with high-impact, rigid poly-compounds with built-in UV stabilizers. Engineered for tropical rainfall, high saline coastal air, and eaves exposure where zero moisture absorption is mandatory.
Combines refined hardwood fiber particles with high-density polymer matrices. Delivers the authentic density, tactile grain, and acoustic richness of real timber while permanently eliminating termite vulnerability and moisture decay.
Precision-moulded polystyrene delivers laser-sharp corners, geometric relief, and lightweight rigidity. Perfect for classical box mouldings, modern geometric wall accents, and custom-painted architectural trims.
NORWOOD™ Indoor Architectural Collection
3D Fluted Wall Panel
Precision engineered 4-flute rectangular profile with 25mm deep flutes and 158mm effective width. Features a concealed fastener flange and tongue & groove joint.
NORWOOD™ Outdoor Architectural Collection
WPC Outdoor Decking (Hollow)
Engineered hollow-core exterior composite decking board engineered for high structural rigidity and reduced dead load. Splinter-free, moisture-impermeable, and anti-slip for outdoor living.
NORWOOD™ Panel Quantity & Hardware Estimator
23 net + 3 cut allowance (10%)
Inside the Structure of Norwood WPC
Click each engineered layer to inspect why our panels withstand decades of tropical humidity, rainfall, and intense sun exposure.
Co-Extrusion Polymer Shield Armor
Exterior UV & Anti-Scratch Outer Shell
A 360-degree protective cap layer co-extruded under high pressure to lock out tropical moisture, UV solar degradation, and everyday scratches.
Key Advantages
Co-Extrusion Polymer Shield Armor
Exterior UV & Anti-Scratch Outer Shell
A 360-degree protective cap layer co-extruded under high pressure to lock out tropical moisture, UV solar degradation, and everyday scratches.
Key Performance Advantages
PVC Ceiling Accessories
Flawless panel installations require matching precision trims. From perimeter end caps to ceiling J-channels and heavy-duty skirting, every accessory is engineered to conceal cuts, accommodate thermal expansion, and deliver a museum-grade architectural edge.
End - Side Ceiling Accessories
2 Profiles Available
Precision end and side perimeter framing profiles designed to anchor PVC ceiling panels cleanly against walls and drywall perimeters while concealing cut edges and accommodating natural thermal expansion.
Why Use This Accessory?
- Hides rough or saw-cut ceiling panel edges along perimeter walls and beams.
- Provides structural perimeter anchoring while allowing expansion clearance under tropical humidity.
- Clean, flush shadowline profile with zero painting or touch-up required.
- 100% waterproof and termite-proof formulation matching Norwood PVC ceilings.
Recommended Uses:
Connecting Ceiling Accessories
1 Profile (Mid-Span Joint Profile)
Engineered mid-span H-connector joint profile designed for seamless long-run ceiling installations. Joins two panel lengths together end-to-end with an architectural expansion groove.
Why Use This Accessory?
- Bridges long ceiling runs where panel lengths exceed standard stock dimensions.
- Eliminates visible uneven butt joints and misaligned panel seams.
- Allows independent linear expansion and contraction of adjacent ceiling panels.
- Concealed snap/slide fastening maintains a flawless surface across wide spans.
Recommended Uses:
Corner Ceiling Accessories
2 Profiles (Interior & Exterior Corners)
Specialized 90-degree internal and external corner profiles designed for multi-level ceilings, bulkheads, beam wraps, and tray ceilings without tedious 45-degree miter cuts.
Included Profiles & Parts
- Interior Corner ProfileInside 90° junctions & tray ceiling steps
- Exterior Corner ProfileOutside 90° beam wrapping & bulkhead drops
Why Use This Accessory?
- Completely eliminates fragile, labor-intensive 45-degree miter cuts at ceiling corners.
- Dedicated Interior profile seals 90° inside wall/ceiling joints and recessed trays cleanly.
- Dedicated Exterior profile wraps 90° dropped beams, bulkheads, and soffit edges cleanly.
- Provides high impact resistance along vulnerable exposed ceiling corners.
Recommended Uses:
Why Contractors Specify NORWOOD™ WPC
Side-by-side engineering evaluation comparing Norwood Co-Extrusion WPC against natural timber and generic hollow PVC panels.
Termite & Wood Borer (Bukbok) Resistance
100% Immune
Water Resistance & Rainproofing
Zero Swelling (<0.5% absorption)
Annual Maintenance (Sanding / Varnish)
Zero (Soap & water wipe only)
Fire Retardant Performance
Class B1 (Self-extinguishing)
Tactile Wood Texture & Depth
Deep photorealistic 3D grain
Expected Lifespan in PH Weather
15+ Years Commercial Grade
| Performance Metric | NORWOOD™ WPCEngineered Co-Extrusion | Natural Solid Timber | Generic Hollow PVC |
|---|---|---|---|
| Termite & Wood Borer (Bukbok) Resistance | 100% Immune | High Risk (Requires chemical spray) | Immune, but brittle over time |
| Water Resistance & Rainproofing | Zero Swelling (<0.5% absorption) | High Swelling & Rot Risk | Waterproof, but lacks structural rigidity |
| Annual Maintenance (Sanding / Varnish) | Zero (Soap & water wipe only) | Costly annual sanding & re-varnish | Low, but yellows under UV sun |
| Fire Retardant Performance | Class B1 (Self-extinguishing) | Combustible fuel source | Melts rapidly with toxic smoke |
| Tactile Wood Texture & Depth | Deep photorealistic 3D grain | Authentic woodgrain | Flat, artificial plastic sheen |
| Expected Lifespan in PH Weather | 15+ Years Commercial Grade | 3–5 Years in tropical humidity | 5–8 Years before cracking |
4-Step Rapid Installation Method
Engineered for fast, concealed-clip installation directly onto drywall studs, timber battens, or light-gauge steel furring.
Batten Sub-framing
Install wood or metal furring battens spaced 400mm center-to-center across the substrate.
Starter Alignment
Position the first Norwood panel plumb with a spirit level; secure starter clips to the base.
Interlock & Clip
Slide the next panel tongue into groove; fasten the concealed stainless steel clip into the batten.
Trim & Corner Caps
Install matching L-corner angles and edge trims for a seamless, architectural flush finish.
Frequently Asked Questions
Common questions regarding material durability, weather resistance, and installation requirements in the Philippines.
Specify For Your Next Architectural Build
Direct stock, custom project quotations, and nationwide delivery across the Philippines. Connect with an architectural specialist at Home Solutions Depot Plus today.